Cultivator Points

Cultivator Points

9 Images |

Characteristics:

  • Hardness: 45 ± 2 HRc. (boron steel)
  • Hardness: 35 ± 2 HRc. (high carbon)
  • Integral hardening to avoid deformations and rupture.
  • Product uniformity guaranteed by strict controls on quality and the production process.

 

Use:

The cultivator points work parallel to the ground, cutting the roots and raising the plants, working to pull without upsetting the soil’s contour. The thin, long cultivator points cultivate by breaking the hardened soil and crushing clods. The cultivator is used both before planting (to prepare the land) and afterwards in row cultivations, with the right tines.

CULTIVATOR POINTS / CULTIVATOR SHOVELS / CULTIVATOR PHALLA
Product Code Width Thickness Length                     (includes curvature) Holes nos.  Weight per piece Weight of set       (9 pcs)
mm mm inch mm kg kg
CS-5608-14-KEKRI 56 8 14 355 3 0.860 7.74
CS-5610-14-KEKRI 56 10 14 355 3 1.150 10.35
CS-6008-10-YUV 60 8 10 255 3 0.700 6.30
CS-6008-10.5 60 8 10.5 265 2 0.750 6.75
CS-6008-12 60 8 12 305 3 0.850 7.65
CS-6008-13-INTER 60 8 13 330 2 0.975 8.78
CS-6008-13-INTER 60 8 13 330 3 0.965 8.69
CS-6008-14 60 8 14 355 3 1.050 9.45
CS-6008-15 60 8 15 380 3 1.080 9.72
CS-6008-16 60 8 16 405 3 1.050 9.45
CS-6010-10.5 60 10 10.5 265 2 0.910 8.19
CS-6010-12-SLOT 60 10 12 305 2(A+A1) 1.085 9.77
CS-6010-12-SLOT 60 10 12 305 3 1.080 9.72
CS-6010-14 60 10 14 355 3 1.325 11.93
CS-6010-15 60 10 15 380 3 1.400 12.60
CS-6010-17 60 10 17 430 3 1.625 14.63
CS-6208-15-BHP 62 8 15 380 2 0.900 8.00
CS-6208-16-BHP 62 8 16 405 2 OR 3 1.000 9.00
CS-6208-17-BHP 62 8 17 430 2 OR 3 1.100 10.00
CS-7007-12-BERI 70 7 12 305 2 0.900 8.10
CS-7007-13 70 7 13 330 3 0.950 8.55
CS-7007-14 70 7 14 355 3 1.000 9.00
CS-7007-15 70 7 15 380 3 1.100 9.90
CS-7007-17 70 7 17 430 3 1.250 11.25
CS-7008-12-BERI 70 8 12 305 2 1.000 9.00
CS-7008-13 70 8 13 330 3 1.085 9.77
CS-7008-14 70 8 14 355 3 1.150 10.35
CS-7008-15 70 8 15 380 3 1.270 11.43
CS-7008-17 70 8 17 430 3 1.430 12.87
CS-7010-12-BERI 70 10 12 305 2 1.200 10.80
CS-7010-13 70 10 13 330 3 1.300 11.70
CS-7010-14 70 10 14 355 3 1.400 12.60
CS-7010-15 70 10 15 380 3 1.500 13.50
CS-7010-17 70 10 17 430 3 1.700 15.30
CS-7011-12 70 11 12 305 3 1.235 11.12
CS-7011-13 70 11 13 330 3 1.380 12.42
CS-7011-14 70 11 14 355 3 1.635 14.72
CS-7011-15 70 11 15 380 3 1.800 16.20
CS-7011-17 70 11 17 430 3 2.100 18.90
CS-7013-14 70 13 14 355 3 1.955 17.60
CS-7013-15 70 13 15 380 3 2.150 19.35
CS-7013-17 70 13 17 430 3 2.420 21.78
CS-8007-14 80 7 14 355 3 1.150 10.35
CS-8007-15 80 7 15 380 3 1.300 11.70
CS-8007-17 80 7 17 430 3 1.600 14.40
CS-8008-14 80 8 14 355 3 1.200 10.80
CS-8008-15 80 8 15 380 3 1.400 12.60
CS-8008-17 80 8 17 430 3 1.700 15.30
CS-8012-14 80 12 14 355 3 1.800 16.20
CS-8012-15 80 12 15 390 3 2.000 18.00
CS-8012-17 80 12 17 430 3 2.300 20.70